We Stock everything you need to build your timber fence. We carry Cypress and Treated Pine Posts, rough sawn Treated Pine Rails and Plinth Board as well as Treated Pine Palings and Cypress pickets.
Our Range Includes
Cypress Posts at 125 x 75 mm in 2.1, 2.4, 2.7 meter lengths
Cypress Posts at 100 x 100mm, 125 x 125mm at 2.4, 2.7, 3 and 3.6 meters We can also source larger dimensions in rough sawn Cypress Posts depending on availability from the mills.
For the more formal fence we have dressed Cypress Gold Posts in 90 x 90 mm and 115 x 115 mm and 140 x 140 mm. Our stock lengths are 2.4, 2.7, 3.0, 3.6 and 4.2 meters subject to availability.
H4 Treated Pine Posts 100 x 100 mm at 2.4, 2.7, 3 and 3.6 meters
We have also started stocking Aussie Steel Fence Posts. These posts have a high galvanized coating to ensure they do not rust compared to modern timber posts which will rot at ground level over time due to water holding and wear. The posts come pre checked out for you DIY guys and girls, meaning that you will not need your power saws to cut the tops off these posts, nor will you have to cut out to fit your rails in. They slide into a wet cement twice as easily as a timber post and are far more lighter, meaning less struggles and less time consuming.
H4 Treated Pine rough sawn rails 75 x 50 mm at 5.4 meters
H4 Treated Pine Plinth Board at 4.8, 5.4 and 6 meters
Treated Pine Palings 100 and 150 mm wide at 1.5, 1.8 and 2.1 meters
We also carry a range of Cypress Pine Windsor topped Pickets at 90 cm, 1.2, 1.5 and 1.8 meters in length
Call or email for prices and availability.
To work out how what materials you need keep in mind you need to put a post at the most every 2.7 meters apart. This works out three posts per 5.4 meter rail and plinth board. For palings, you have a 150 mm paling with a 50 mm gap between making 5 per meter. You then have a 100mm paling covering the 50mm gap with 25mm covering either side of the 150 paling again getting 5 palings per meter.